Company News Current Location:Home > News > Company News
A smart look at how sheet metal working is done with painting
Time:2023/12/6 15:58:12
There are many processes of sheet metal processing, but today we are going to talk to you about the sheet metal processing of spray painting technology. In order to make you better to use sheet metal processing, I went to ask a professional, I hope that through his introduction to let you know how to spray paint sheet metal processing, the details are as follows, for reference only.In the sheet metal processing of painting technology, he mainly has several kinds of technology, such as paint mixing, sanding, etc., of course, these two are also the most important inside. In the sheet metal painting, we now basically use dry grinding to replace the previous water grinding. The biggest feature of using dry grinding is that his efficiency is relatively high, when we use dry grinding after his paint repair time is shorter than before. In addition, we can use dry grinding to a large extent to save water, and he will not let the sheet metal parts corrosion. Many friends of the sheet metal processing of paint are not very understanding, so in the use of the time is also more superficial things.
When we are in the actual sheet metal processing operations, we have to first remove the sheet metal parts, of course, if some of the parts that are seriously damaged that we can use the method of cutting to dismantle. The broken places are cleaned up after looking for the correct maintenance. We also have to sand the previous paint film, know that he exposed the iron plate layer, and then according to the degree of wear and tear of the sheet metal parts to make use of the specific method of levelling. Then we will have to do the fire and the sanding of the joints.